Stax

कट & फिल कैलकुलेटर

एलिवेशन ग्रिड से अर्थवर्क कट और फिल वॉल्यूम कैलकुलेट करें।

Enter existing (top) and proposed (bottom) elevation for each grid cell (m)
00.0
C1.0
C2.0
C3.0
C1.0
C2.0
C3.0
C4.0
C2.0
C3.0
C4.0
C5.0
C3.0
C4.0
C5.0
C6.0
Red=Cut, Blue=Fill
Total cut (bank)
4800.00 m³
Cut loose (swell)
6000.00 m³
Fill required
0.00 m³
Fill loose needed
0.00 m³
6000.0 m³ surplus (haul away)

कट & फिल कैलकुलेटर क्या है?

यह टूल elevation grid से earthwork cut और fill volumes calculate करता है। Site leveling, road construction, landscaping projects के लिए ज़रूरी।

Cut & fill कैसे calculate करें

  1. Site grid set करें।
  2. हर point की existing और desired elevations।
  3. Cut volume (positive heights) calculate।
  4. Fill volume (negative) calculate।
  5. Balance check करें।

मुख्य considerations

  • Cut = Fill (balanced site ideal)
  • Bulking factor 20-40% (loose soil)
  • Compaction shrinkage 5-15%
  • Transport cost minimize करें
  • Environmental clearances

अक्सर पूछे जाने वाले प्रश्न

Cut and fill क्या है?
Earthwork — high points cut (excavate), low points fill (compact)। Site leveling के लिए ज़रूरी। Goal: balance achieve करना (cut volume = fill volume) — transport costs minimize।
Volume कैसे calculate होता है?
Site को grid में divide करें। हर grid point की elevation। Average end area method या prismoidal formula से volumes। Larger grid = faster but less accurate। 10m grid commonly used।
Cut और fill balance क्यों ज़रूरी?
Excess cut: dumping cost, environmental issues। Excess fill: import cost, compaction concerns। Balanced site: economical, sustainable। Designers grades adjust करते हैं इस balance के लिए।
Bulking factor क्या है?
Excavated soil loose होकर 20-40% बढ़ता है। Compacted fill के लिए वापस 5-15% shrink। Cut volume × bulking factor = transport volume। Fill volume × shrinkage = needed soil।

संबंधित टूल्स